Hot Water Solutions
Global Experience in Hot Water
Because of Armstrong’s extensive expertise and experience, which span more than a century, we are uniquely able to comprehend the hot water system dynamics in your business. For institutional and industrial hot water applications, our trustworthy, durable products, cutting-edge technology, and complete, fully integrated system solutions are designed to meet the strictest requirements.
Institutional Hot Water
Armstrong is aware of the standards and regulations for your sector and is a world leader in domestic hot water generation, digital mixing, and water temperature management. Our cutting-edge hot water solutions are made to reduce the danger of scald damage and related lawsuits while reducing the chance of Legionella and other opportunistic infections growing and spreading in building water systems.
Industrial Hot Water
For process industries, Armstrong is the recognized global leader in rapid hot water generation, mixing, and temperature control. Our knowledgeable professionals will demonstrate to you how to raise output and yield, increase efficiency and safety, prevent scaling, and meet international water quality standards. Armstrong is your one-stop shop for anything from a comprehensive, fully integrated hot water system for a new facility to custom engineering and turnkey solutions for your existing plants around the world.
ABH Hot Water Generation & Control Solutions
The Brain® Digital Recirculation Valve (DRV), which regulates the temperature of the hot water system, is included with ABH Gas Fired Water Heaters as part of comprehensive packaged water heating systems. All systems are sent ready to set in place with little to no assembly since ABH assemblies are designed and built to precisely suit the criteria of the installation location.
ABH uses a multiple pass condensing method to ensure that the heat exchanger in the unit receives the maximum amount of heat and energy from the combustion process. With operating efficiency as high as 99.8%, its cutting-edge design maximizes the condensing condition over a wider operational range than conventional water heating methods.
Armstrong+Combitherm Heat Pump Systems
A specially engineered package solution, ARMSTRONG+COMBITHERM Heat Pumps deliver high-efficiency heating, cooling, and hot water generation. Our heat pumps recover your wasted heat and use it where you need it most—as a substitute for fuel—to achieve greater thermal efficiency, de-steaming, and decarbonization. An integral part of Circular ThermalSM, the brain of Armstrong’s Decarbonization Methodology, is the ARMSTRONG+COMBITHERM Heat Pump.
Digital-Flo Boiler Water PHE
The pre-piped packaged water heating system Digital-Flo® Boiler Water PHE includes a Brain® Digital Recirculation Valve (DRV) for controlling the temperature of the hot water system’s water supply.
By consistently delivering a pre-set temperature to the sites of use, The Brain®, a device designed particularly for continuously recirculated hot water systems, enhances system performance and safety.
Digital-Flo Boiler Water PHE With SAGE
Digital-Flo® is available with single wall or double wall heat exchangers in 4 standard sizes with >160°F (71°C) and <160°F (71°C) models. SAGE® performance software monitors, records, and documents data as a critical component of a Water Safety Management Plan. SAGE® works seamlessly with several building automation system protocols, or users can purchase a subscription to use SAGE® on a mobile device.
Digital-Flo Instantaneous Steam/Water Heater
The Digital-Flo® Instantaneous Steam/Water Heater is a pre-piped packaged water heating solution with an integral Brain® Digital Recirculation Valve (DRV) for hot water system water temperature control.
Engineered exclusively for continuously recirculated hot water systems, The Brain® improves system performance and safety by delivering a consistent pre-set temperature to the points of use.
Digital-Flo Instantaneous Steam/Water Heater with SAGE
Digital-Flo® is available with single wall or double wall heat exchangers in 4 standard sizes each with a parallel/redundant option and can be customized to suit. SAGE® performance software monitors, records, and documents data as a critical component of a Water Safety Management Plan. SAGE® works seamlessly with several building automation system protocols, or users can purchase a subscription to use SAGE® on a mobile device.
Digital-Flow Semi Instantaneous Steam/Water Heater
The Digital-Flo Semi Instantaneous Steam/Water Heater is a pre-piped packaged water heating solution with an integral Brain® Digital Recirculation Valve (DRV) for hot water system water temperature control.
Engineered exclusively for continuously recirculated hot water systems, The Brain improves system performance and safety by delivering a consistent pre-set temperature to the points of use.
Digital-Flow Semi Instantaneous Steam/Water Heater With SAGE
In 4 standard sizes, each with a parallel/redundant option, Digital-Flo® is offered with single or double wall heat exchangers and can be tailored to your needs. A vital part of a water safety management plan is the monitoring, recording, and documentation of data by SAGE® performance software. Several building automation system protocols are fully compatible with SAGE®, and users can also buy a subscription to use SAGE® on a mobile device.
Emech Digital Control Valves
Emech® is digital hardware that is more efficient, straightforward, and intelligent with the single objective of providing unmatched performance in industrial applications.
For industrial use with steam/water and hot/cold water, Emech® digital control valves are available.
Emech Industrial Mixing Center
Emech® digital control valve has a compact design and is simple to install because it is pre-piped as an industrial mixing center with all necessary installation components. Recirculation or non-recirculation applications are typically factory constructed.
Emergency Fixtures
According to ANSI standard Z358.1-2009, the Model Z358 thermostatic mixing valve (TMV) is suitable for placement at or close to a point of application for tepid water supply to a single, combination, or group of emergency fixtures. It comes in two flow capacities.
Flo-Direct Gas Fired Water Heaters
A line of high-efficiency, small, stainless-steel water heaters called Flo-Direct® Gas-Fired Water Heaters are available. The Flo-Direct® line is incredibly dependable, straightforward in both design and use, and appropriate for a wide range of hot-water applications.
Standard operational capacities for Flo-Direct® range from 1 million to 10 million BTU per hour, and systems can be built to accommodate capacities up to 60+ million BTU per hour.
Flo-Rite-Temp Pre-Piped for Digital Control of Recirculating Hot Water Systems
Flo-Rite-Temp Pre-Piped for Digital Recirculating Control HW Systems are packaged water heating systems that are constructed in factories and include a shell and tube heat exchanger with an incorporated control valve for system temperature control and water heating.
With the feed forward design, cold water is sent via the heat exchanger while upstream hot water demand is quickly determined. With constant pressure steam, water is heated above legionella survival levels before being diluted with an appropriate amount of cold water to reach the desired temperature.
Flo-Rite-Temp Pre-Piped for Digital Control of Recirculating Hot Water Systems With SAGE
A vital part of a water safety management plan is the monitoring, recording, and documentation of data by SAGE® performance software. Several building automation system protocols are compatible with SAGE, and customers can also acquire a subscription to utilize SAGE® on a mobile device.
Flo-Rite-Temp Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems
The factory-built water heating packaged systems known as Flo-Rite-Temp Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems include a shell and tube heat exchanger equipped with an inbuilt control valve for water heating and system temperature control.
Flo-Rite-Temp Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems
The piping assembly, which was designed specifically for recirculating hot water systems, has a three-way thermostatic diverting valve.
The Flo-Rite-Temp Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems are available in 4 basic sizes, each with a parallel/redundant option, with single wall or double wall heat exchangers, and can be tailored to your needs.
Flo-Rite-Temp Steam/Water Heaters
A shell and tube heat exchanger with an incorporated control valve for water heating and temperature control is the Flo-Rite-Temp® Instantaneous Steam/Water Heater.
Cold water is sent through the heat exchanger according to the feed forward design, which quickly calculates the demand for the downstream system. With constant pressure steam, water is heated above legionella survival levels before being diluted with an appropriate amount of cold water to reach the desired temperature.
